☆ 唐尼樂器︵☆ Voodoo Lab Pedal Power 2 Plus 電吉他/電貝斯 Bass 效果器電源供應器
$7,600
已售出 1 件
運費抵用券7-ELEVEN 滿99元運費折抵31元
- 現金付款
- 信用卡付款
- 全家取貨付款
- 萊爾富取貨付款
- 7-ELEVEN取貨付款
現金付款
- Yahoo奇摩輕鬆付現金接受付款方式：ATM轉帳 / Famiport / 輕鬆付帳戶餘額
ATM 提供5家銀行：合作金庫、華南銀行、台灣銀行、國泰世華、中國信託，以上5家同行轉帳，免轉帳手續費。
信用卡一次付清
— Yahoo奇摩輕鬆付全家取貨付款
— Yahoo奇摩輕鬆付7-ELEVEN取貨付款
— Yahoo奇摩輕鬆付萊爾富取貨付款
— Yahoo奇摩輕鬆付7-ELEVEN取貨付款 — 單件運費$60、消費滿$1000免運費
- 單件運費$60
- 滿2件，運費$60
- 消費滿$1000免運費
全家取貨付款 — 單件運費$60、消費滿$1000免運費
- 單件運費$60
- 滿2件，運費$60
- 消費滿$1000免運費
萊爾富取貨付款 — 單件運費$60、消費滿$1000免運費
- 單件運費$60
- 滿2件，運費$60
- 消費滿$1000免運費
宅配/貨運 — 單件運費$130、消費滿$1000免運費
- 單件運費$130
- 滿2件，運費$130
- 消費滿$1000免運費
郵寄掛號 — 單件運費$40、消費滿$1000免運費
- 單件運費$40
- 滿2件，運費$40
- 消費滿$1000免運費
離島寄送 — 單件運費$40、消費滿$1000免運費
- 單件運費$40
- 滿2件，運費$40
- 消費滿$1000免運費
輕鬆付提供價金保管，交易更安心！
商品資訊
★ Voodoo Lab Pedal Power 2 Plus 電吉他/電貝斯 Bass 效果器電源供應器！★
9/12V (x4) – Standard 9V and 12V Boss ACA
With each one of these four outputs delivering 100mA, you can easily power any 9V battery-operated pedals. Boss pedals that specify the PSA adapter operate at 9V like most other pedals. Boss pedals that require the ACA adapter operate at 12V which can be selected via switches underneath the Pedal Power 2 Plus. Any one of these outputs can be individually selected to run at 9V or 12V.
9V (x2) – High Current 9V and Line 6 Modelers
These two outputs each deliver 250mA allowing you to run high current draw effects like the Boss DD-20 Giga Delay or Line 6 DL4 Delay Modeler. Via switches underneath the Pedal Power 2 Plus, these two outputs can be separately configured for regulated (Boss Twin Pedals) or unregulated (Line 6 Modelers) power allowing you to run both units if so desired. These outputs can also power any standard 9V effects as well.
9V (x2) – Standard 9V With Battery Sag Control
These outputs each have an available 100mA of power, but also allow you to SAG the voltage from roughly 4V to 9V. This feature can be enabled via the bottom panel switches. The SAG control is mostly useful for transistor-based fuzz, octavia, and distortion circuits, as most modern opamp designs are minimally affected by variations in supply voltage. We recommend turning SAG off if you’re going to run digital pedals like delay, chorus, and reverb.
18V/24V – Using Custom Cables
All of the outputs on the Pedal Power 2 Plus (and the original Pedal Power) are completely isolated allowing you to create different voltages. You can run effects like the current MXR Flanger by combining two 9V outputs to create a single 18V supply. By switching two outputs into 12V ACA mode, you can join them together to create a 24V output for powering numerous Electro-Harmonix stompboxes including the Deluxe Memory Man.
更多優質的樂器及周邊商品陸續在唐尼上架中!
如有任何疑問．請多加利用問與答
關於 Tony Music 唐尼樂器 請參考"關於我"．謝謝！=)
