物聯汪汪

物聯汪汪實名驗證

Y5838639501粉絲數862小時前上線

正評 100% (115)

more

出貨速度 1 未出貨率 0%加入時間 2016/03/21

正評

100%

總評價 115
未出貨率

0%

優於全站平均

含稅附發票~正版STLINK-V3 STLINK-V3SET模組在線除錯及燒錄器STM32/STM8

直購
定價

$1,600

已售出 1

    數量
    付款方式
    • 現金付款
    • 全家取貨付款
    • 7-ELEVEN取貨付款

    現金付款

    • Yahoo奇摩輕鬆付現金接受付款方式:ATM轉帳 / Famiport / 輕鬆付帳戶餘額

    ATM 提供5家銀行:合作金庫、華南銀行、台灣銀行、國泰世華、中國信託,以上5家同行轉帳,免轉帳手續費。

    全家取貨付款

    Yahoo奇摩輕鬆付

    7-ELEVEN取貨付款

    Yahoo奇摩輕鬆付
    運費
    • 全家取貨付款單件運費$60、消費滿$20000免運費

      • 單件運費$60
      • 滿2件,運費$60
      • 消費滿$20000免運費
    • 7-ELEVEN取貨付款單件運費$60、消費滿$20000免運費

      • 單件運費$60
      • 滿2件,運費$60
      • 消費滿$20000免運費
    • 郵寄掛號單件運費$70、消費滿$20000免運費

      • 單件運費$70
      • 滿2件,運費$70
      • 消費滿$20000免運費
    商品狀況
    全新品
    所在地區
    新北市
    商品編號
    100988733538
    輕鬆付 價金保管新登場
    輕鬆付 價金保管新登場

    輕鬆付提供價金保管,交易更安心!

    商品資訊

    本賣場商品一律含稅開發票,需要統編者請下單後備註公司名及統編即可!


    詳盡技術資料請見原廠或供應商 https://www.st.com/en/development-tools/stlink-v3set.html [ https://www.st.com/en/development-tools/stlink-v3set.html ]  料號:STLINK-V3SET


    The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and a complementary adapter board.

    圖片 [ https://www.st.com/en/development-tools/stlink-v3set.html# ]

    The SWIM and JTAG/SWD interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
    The STLINK-V3SET also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART, and bridge interfaces (SPI, I2C, CAN, GPIOs) allowing for instance the programming of the target through the bootloader.
    The STLINK-V3SET can provide a second Virtual COM port interface allowing the host PC to communicate with the target microcontroller through another UART (called bridge UART). Bridge UART signals, including optional RTS and CTS, are available on adapter board only (MB1440). The second Virtual COM port activation is done through a reversible firmware update, which also disables the mass storage interface (used for drag-and-drop flash programming).
    The modular architecture of STLINK-V3SET enables to extend its main features through additional modules such as the adapter board.

    KEY FEATURES

    • Stand-alone probe with modular extensions
    • Self-powered through a USB connector (Micro-B)
    • USB 2.0 high-speed compatible interface
    • Direct firmware update support (DFU)
    • JTAG / serial wire debugging (SWD) specific features:
      • 3 to 3.6 V application voltage support and 5 V tolerant inputs
      • Flat cables STDC14 to MIPI10 / STDC14 / MIPI20 (connectors with 1.27 mm pitch)
      • JTAG communication support
      • SWD and serial wire viewer (SWV) communication support
    • SWIM specific features (only available with adapter board MB1440):
      • 1.65 to 5.5 V application voltage support
      • SWIM header (2.54 mm pitch)
      • SWIM low-speed and high-speed modes support
    • Virtual COM port (VCP) specific features:
      • 3 to 3.6 V application voltage support on the UART interface and 5 V tolerant inputs
      • VCP frequency up to 15 MHz
      • Available on STDC14 debug connector (not available on MIPI10)
    • Multi-path bridge USB to SPI/UART/I2C/CAN/GPIOs specific features:
      • 3 to 3.6 V application voltage support and 5 V tolerant inputs
      • Signals available on adapter board only (MB1440)
    • Drag-and-drop flash programming of binary files
    • Two-color LEDs: communication, power
    本日最速最優惠