Honda TRX200D FourTrax 200 Type II 1991-1997電盤內仁-極限超快感
$1,300
運費抵用券7-ELEVEN 滿99元運費折抵31元
- 現金付款
- 全家取貨付款
- 萊爾富取貨付款
- 7-ELEVEN取貨付款
現金付款
- Yahoo奇摩輕鬆付現金接受付款方式：ATM轉帳 / Famiport / 輕鬆付帳戶餘額
ATM 提供5家銀行：合作金庫、華南銀行、台灣銀行、國泰世華、中國信託，以上5家同行轉帳，免轉帳手續費。
全家取貨付款
— Yahoo奇摩輕鬆付7-ELEVEN取貨付款
— Yahoo奇摩輕鬆付萊爾富取貨付款
— Yahoo奇摩輕鬆付7-ELEVEN取貨付款 — 單件運費$60、滿3件或消費滿$5000免運費
- 單件運費$60
- 滿2件，運費$60
- 滿3件或消費滿$5000免運費
全家取貨付款 — 單件運費$60、滿3件或消費滿$5000免運費
- 單件運費$60
- 滿2件，運費$60
- 滿3件或消費滿$5000免運費
萊爾富取貨付款 — 單件運費$60、滿3件或消費滿$5000免運費
- 單件運費$60
- 滿2件，運費$60
- 滿3件或消費滿$5000免運費
宅配/貨運 — 單件運費$120、滿3件或消費滿$5000免運費
面交/自取/不寄送 — 免運費
郵寄掛號 — 單件運費$60、滿3件或消費滿$5000免運費
大型/超重物品運送 — 單件運費$120、滿3件或消費滿$5000免運費
輕鬆付提供價金保管，交易更安心！
店內相關商品
商品資訊
Magneto Generator Engine Stator Coil For Honda TRX200 A D FourTrax 200 1990-1991 Type II 1991-1997 31120-HF1-000 31120-HF1-004
FEATURES:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Replacement Part Number:31120-HF1-000,31120-HF1-004
Dimensions :
Interior diameter : 35mm / 1.37"
Exterior diameter : 88mm / 3.46"
Thickness : 21mm / 0.82"
Other specifications :
Number of wires: 5
Number of pins: 5
Number of plugs: 2
Number of fixation holes: 3
FITMENT:
For Honda TRX200A FourTrax 200 1990-1991
For Honda TRX200D FourTrax 200 Type II 1991-1997
PACKAGE INCLUDED:
1x Generator Stator Coil
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
